Service hotline
0086-519-85563477
Product introduction
In response to the production and testing needs of these rechargeable batteries, Our company has developed a special comprehensive rechargeable battery tester. This tester can make a quantitative and accurate measurement of some basic parameters of the battery, and can measure the open circuit voltage of the battery. Resistance, charge, discharge performance, battery capacity, especially for lithium battery functions, such as overcharge protection, over discharge protection, over current protection, short circuit protection and other functions, and the corresponding values have been measured, which greatly facilitates battery production Work with pre-sales and after-sales services, you can intuitively judge the performance and quality of the battery in a few simple steps, and also have a quick screening function, you can set the upper and lower limits of the measurement parameters, you can easily from a batch Defective batteries are quickly detected in the finished battery to improve production efficiency. In addition, some special functions are added to make it have some characteristics of general instruments and equipment, which expands the flexibility of the equipment and has the characteristics of a wide range of applications.
Basic functions:
1. Quick detection of battery static parameters
1.1 Battery voltage detection (for lithium batteries that are already in the protected state, it can automatically wake up)
1.2 Detection of battery internal resistance
1.3 Battery rechargeability performance test
1.4 Battery discharge performance test
1.5 Battery overcurrent detection (only for lithium batteries)
1.6 Detection of battery short-circuit protection function (only for lithium batteries)
1.7 For the part that can detect the size of the value above, you can set the upper limit and lower limit separately to quickly filter
2. Battery capacity detection
3. Separately selectable battery charging function
4. Separately selectable battery discharge function
5. CNC current and voltage source function
6. CNC electronic load function
7. Voltage and internal resistance meter function
8. Parameter list test
Model | JK5530 | JK5530+ | JK5530B | |
Test range
| Voltage measurement range | 0-36V, resolution:1mV | 0-60V resolution:1mV | 0-62V resolution 1mV accuracy：±5mV |
Internal resistance measurement range | 0-1999mΩ Resolution 1mΩ | |||
Capacity measurement range | 0-99999mAH,Minimum resolution 1mAH | |||
R1 R2 resistance | 1kΩ ~ 200kΩ | |||
Accuracy | Voltage measurement accuracy | ±（result*0.1%+3mV） （voltage 0~36V） | ||
Current measurement accuracy | ±（result*0.2%+30mA）（current 0~10A） | |||
Internal resistance measurement accuracy | ±（result*1%+1mΩ） | |||
Capacity measurement accuracy | ±2% | |||
Test speed | Static test (All functions) | 1.1-2s | ||
Capacity test | Determine the capacity test time according to the battery capacity and discharge power | |||
Internal CNC | Maximum output voltage(Constant voltage + constant current) | 20V | 60V | |
Voltage source index | Output maximum current | 5A | 10A(common） | |
Output maximum power | 80W | 200 W | ||
Ripple voltage | <20mV | <100mV | ||
Load adjustment rate | <10% | |||
Response time (time from 0 to the highest output voltage) | 1S | |||
Internal CNC electronic load index | Maximum discharge voltage | 30V | 62 V | |
Maximum discharge current | 10A（continuous） | 30A（continuous） | ||
Limit power | 80W（continuous） | 100W（continuous） | 200W（continuous） | |
Load mode | constant current | Constant voltage, constant current | ||
Interface | No | Yes (with host computer software) | ||
Accessories | Test fixture for resistance, Test fixture for voltage, Temperature probe, Power cable, Data line (JK5530+,JK5530B) | |||
Size&Weight | JK5530/JK5530+ Dimension(mm):225(W)*110(H)*355(D), About 3.6kg JK5530B Dimension(mm):225(W)*110(H)*405(D), About 4.5kg | |||
