Service hotline
0086-519-85563477
JK2683 leakage current and the insulation resistance is to use high performance microprocessor control capacitor leakage current/insulation resistance meter. CNC test voltage: 10 v ~ 1000 v, 7 range test, the leakage current accuracy increased to 1%, it can measure 1 na ~ 20 ma current, the insulation resistance of the largest 1000 g Ω biggest display digits number 9999. High-speed test provides the best solutions for automated production assembly. Instrument has a sorting function, sorting ring set, It also can be equipped with Handler interface which is applied to the automatic sorting system to accomplish automatic assembly line testing. By the built-in RS232C interface, can be used for remote control and data acquisition and analysis.
Test Parameter | Leakage Current And Insulation Resistance |
Basic Accuracy | 1% |
Output Voltage | Numerical Control :10v～1000vdc |
Measurement Range | Current :1na~20ma Resistance：1kω~1000gω (2%+2 dgt.) |
Reading | 9999 |
Range | Automatic |
Charging Current | 200ma（Max） |
Measurement Speed | 8meas/Sec |
Display Result | Direct Reading, Resistance, Peak, And The Result Of The Separation |
Correction | Open Circuit Remove One Zero |
Charging Timer | 999.9s |
Comparator | 5 Set Of Records，Gd/Ng |
Fail-On | Gd,Ng |
Interface | Rs-232 Handler |
Power Requirement | Voltage：198vac～240vac Frequency：50hz Power：Maximum 50va |
Dimensions And Weight | External Dimension（mm）:310 (W)X110h)X390 (D) |
Accessory | Test Clips , Test Fixture |
| Features | ||
●A variety of parameters shows at the same time ●peak-value-holding function ●Full range open reset function ●The comparator output：Through RS232C output or Handler interface separation results. ●Fail-on：can set up fail-on switch ●GD/NG fail-on和trigger mode：The external trigger, manual triggering, internal trigger and remote trigger ●Optional foot switch | ||
| Application | ||
●Electronic components, equipment insulation resistance testing ●The transistor leakage current test ●Dielectric materials and wire and cable insulation resistance test, etc | ||
